[Product name] Drainage catheter fixation
[Specification] A total of A, B, C, D, E five specifications
[Main structure] Products by pad、fixator、application、lock
[Product patent certificate] Patent number：ZL 201320105704.6
PRODUCT STRUCTURE
MECHANISM STRUCTURA
[Product performance] Instead of the traditional method of catheter fixation, reduces the workload of medical staff, and clean appearance, simple operation, firm fixation, no slippage phenomenon, reduce the pain of patients.
[Product advantages]
1. Alternative suture fixation，prevent traction pain，ease tensions between doctors and patients。
2. Absorb the effusion around the drainage catheter，prevent wound infecting caused by effusion。
3. Transparent structure，convenient for the doctor and the patient to observe the drainage effusion，prevent unexpected accident happening。
4. Novel design，firm and not slipping，clean and beautiful，simple operation，easy for health care worker to use。
[Instructions]
1. The selection and matching will use drainage catheter drainage catheter fixer standby;
2. The skin disinfection with alcohol;
3. Open the packaging, remove the cotton pad, along the slit at the cotton pad on the catheter (surface contact skin cotton pad);
4. Remove the locking and fixing plate, along the slit at the locking and fixing plate on the catheter;
5. Knead gently until the locking, drainage catheter was clamped;
6. The top posts along the slit position in the lock, tear affixed to the release paper, adhesive and the surface of the skin, so that the drainage tube fixed on the skin.
² THE METHOD USED
1. Make the pad clamp the drainage along the slit 2. Make the lock and fixed disk clamp the
（Smooth surface contact with skin）。 drainage along the slit。
3. Squeeze the lock to tighten the drainage。 4. Make the fixed sticker clamp the lock along the slit。
5. Tear up the release paper of fixed sticker， 6. After pressing gently，tear the plastic film
and bond it with skin（Prevent pasting repeatedly）。 of the fixed sticker，ensure the fixed disk
full contact with skin。
CHANGE THE OPERATION
1.Remove the fixed stickers：Lift a corner，pull out 2. Remove the lock：Poke the lock with
the fixed disk gently。 forefinger gently it will be open immediately。
3. Replace the device：Take out the pad and the fixed disk，
then，operate according to the use instructions。
² CONTRAST METHOD
² Comparison chart
Traditional fixed figure New fixed figure
² Product specifications and clinical applications
[Notice]
1. Product expectations for the disposable products, can be pasted and fixed 3-6 days;
2. If damaged packaging, is strictly prohibited;
3. Screw shoulds not be too tight or too loose.
[Contradiction] It must be cautiously used to patients with skin allergy.
[Storage condition] Relative humidity is not more than 80%, no corrosive gas, cool, dry, well ventilated, clean environment, avoid high temperature flame.
|
